If you’re preparing to install a new shower stall, you may want to consider using vinyl shower tile. It’s easy to install and can be inexpensive. Waterproof is a major consideration, and so is the ease of maintaining it. Here are some tips on how to install this type of flooring.
Waterproof
Vinyl tile is waterproof, but it’s important to install it properly. Installers should match up seams and press the tiles together tightly to prevent water seepage. Otherwise, water can get behind the tiles and damage the walls. This water can also create a breeding ground for mold. Luxury vinyl flooring sheets are easier to install in the shower, as they have no seams to worry about.
Before installing vinyl tile, prepare the shower walls by cleaning them thoroughly and allowing them to dry for 24 hours. Then, level and smooth the surface. If necessary, use a mallet or sandpaper to level the surface. When installing luxury vinyl tile, you may also want to consider using a cardboard template.
It’s also important to waterproof the shower. The amount of water it gets can have a huge impact on the durability of tile. A properly installed shower is waterproof, but it doesn’t mean the tile is completely resistant to water. Waterproofing is an important precaution for both health and home safety. In the case of mold, waterproofing the tile will prevent the growth of mold. Also, installing a bathroom ventilation fan and a dehumidifier will help control humidity levels.
Easy to install
If you’re looking for an easy way to spruce up your bathroom’s decor, vinyl tile is a great choice. Despite its easy installation, the process does require a bit of patience. First, you need to prepare your wall for the tile. Make sure that it is clean and free of dust. Once you’ve done that, you’ll have the perfect surface for the tile to stick to.
Vinyl tile comes in a wide variety of styles and designs. Its waterproof properties make it a great choice for areas that receive a lot of water. The key to maintaining the waterproof qualities of this material, however, is in how well it is installed. Luxury vinyl tiles typically feature side-by-side tiles that have seams, but these can be fixed by following proper installation guidelines. Alternatively, you can opt for a roll of vinyl with fewer or no seams.
To install vinyl tile, first you must remove the old wall covering. Then, you can lay the new tile over the clean ceramic tiles. Care must be taken to avoid putting nails or screws in the tile because they can create gaps and lumps. It is also best to purchase extra planks to prevent gaps and mistakes. If the package does not contain enough tiles, simply return it to the store.
Easy to maintain
If you want to maintain your new shower tile, you’ll need to know a few tips. One of the most important is to clean it regularly. You can use a glass cleaner to do this. However, be sure not to use abrasive cleaners, since these may scratch the tile.
Vinyl tile is very easy to clean, and it’s also inexpensive and comfortable. If you want to maintain the tile’s shine, you can apply a solution of apple cider vinegar or distilled white vinegar. Afterward, simply rinse the tile with plain, hot water. You can also use baby oil to remove any scuffs or stains.
Another important tip is to wipe the tile regularly. Spots should be cleaned as soon as possible. While it’s impossible to remove all stains and dirt, you can use a baking soda/water solution to remove acidic stains. Apply it to the tile with a soft towel. If the stain persists, you can apply a vinegar/water solution and wipe the surface clean.
Affordable
Affordable vinyl shower tile can give a bathroom an elegant look and feel while still being affordable. The material used to make vinyl tiles is very water-resistant and low-maintenance. Because of this, it’s often referred to as resilient flooring. Its durability makes it a great choice for budget-conscious homeowners.
Conclusion
Vinyl tile can be installed easily. After preparing the walls, you can peel off the adhesive backing and install the tile. Be sure to press firmly to make sure it sticks. A rolling pin or roller can be used to flatten out air bubbles under the tile.